Rear-ported cabinet design with 3" flared precision port (flared on both ends). Includes foam balls to convert to a sealed-box alignment, as shown above. 3-layer composite baffle and back: 3/4" Ultralight MDF (for top, bottom, and sides), 6mm Finland Birch ply, an extra layer of phenolic under the veneer, and ladder bracing "R" Compound: Heavy asphalt - vinyl composite with Talc and crystalline granules applied cabinet walls. Reduces cabinet resonance and standing waves Cardas Multi-way Binding Posts Dimensions: 20" tall x 11" wide x 14" deep

Sensitivity: 96dB Impedance: 8-ohms 8” Omega HempTone driver made specifically for Omega by Hemp acoustics incorporating custom modified backwaves, basket, and whizzer cone tweeks Freq response: 50Hz – 18K (In-room LFR: 42Hz) Power requirement : as little as 1.5 watts Cross-over : None Warranty 10 year parts and labor for workmanship and defects Weight : 35 pounds each

Sealed cabinet design with aperiodic venting 3-layer composite baffle and back: 3/4" Ultralight MDF (for top, bottom, and sides), 6mm Finland Birch ply, an extra layer of phenolic under the veneer, and ladder bracing "R" Compound: Heavy asphalt - vinyl composite with Talc and crystalline granules applied cabinet walls. Reduces cabinet resonance and standing waves Cardas Multi-way Binding Posts Dimensions: 20" tall x 11" wide x 14" deep

Sensitivity: 95dB Impedance: 6-ohms Driver: 8” full range Visaton B200, with custom modified backwaves and basket tweaks Freq response: 52Hz – 18K (In-room LFR: 45Hz) Power requirement : as little as 2 watts Cross-over : None Warranty 10 year parts and labor for workmanship and defects Weight : 35 pounds each

The Super 3 XRS (eXtended response system) uses a 4.5" Shielded Fostex ES cone full-range driver that is custom modified by Omega Speaker Systems. This driver incorporates a very light cone (2.9 grams) and strong motor to produce high sensitivity, incredible speed, transparency, and excellent detail. The Super 3 XRS is also a perfect point-source and is phase correct. Imaging and soundstage reproduction are exceptional. The wide baffle construction improves midrange smoothness and tonality in the critical mid-range. The Super 3 XRS interacts with the room to extend the bass output and the built-in, adjustable tilt allows for even better soundstaging. The Super 3 XRS incorporates custom Omega vibration damping techniques that include: The Omega re-bond dampening, a mass-loaded chamber, and a triple layer semi floating baffle and back.

Cabinet type -- Ported, mass-loaded, single driver floor standing Cabinet construction -- Composite (Ultralight MDF, Baltic Birch, and Phenolic) Driver -- Omega Modified Full range 4.5” Fostex paper cone with rubber impregnated surround, alloy chassis, and fully shielded Magnet Speaker Grills (does not use grill sockets....for a much cleaner appearance) Frequency response -- 40-18KHz Sensitivity -- 93dB at 8 ohms Power requirement -- as little as 2 watts Port -- 2" Precision flared single port Internal wiring -- Omega cabling, standard Crossover -- None Terminals -- Heavy duty, multi-way, gold plated binding posts Warranty -- 10 year parts and labor for workmanship and defects Dimensions -- 27” H x 11”W x 7.5”D Weight -- 30 lbs. each Wood finishes -- Macassar Ebony, Teak, and Zebra Wood Laminate finishes -- Black or Red Parisian Maple, Blue Arctic

Imagine the harmonic integrity. No crossover means seamless music. Perfect for all Tube, and most Solid State amplifiers. The Super 3 uses a 4.5" Shielded Fostex ES cone full-range driver that is modified by Omega Speaker Systems. This driver incorporates a very light cone( 2.9 grams ) and very strong motor to produce high sensitivity, incredible speed, transparency, and excellent detail. The Super 3 is also a perfect point-source and is phase correct. Imaging and soundstage are exceptional. Wide baffle construction improves midrange smoothness and tonality in the critical mid-range and exceptional bass response. The Super 3 is a compact bass reflex speaker so positioning in your listening room is easy. We chose to manufacture bass reflex systems as oppose to bass horns because the bass reflex system has tighter more accurate bass that goes just as low or lower than bass horns. Cabinets are more compact and easier to place as well as lower in cost to manufacture. Bass reflex cabinets have no horn passage directly behind the driver so damping material can be placed to suppress standing waves and bounce back reflections that cause frequency cancellation and distortion. The Super 3 incorporates the same damping techniques as the Grande 6 and 8 including: Omega diffuser, special random thrown sponge rubber damping, ladder bracing, and a triple layer semi floating baffle and back. Cabinets are constructed of 3/4" softwood M. D. F. are adhered with polyurethane glues and are veneered on all sides including double veneers on front and back.

Type : Ported Single Driver stand/shelf mount Frequency response : 58-20KHz Sensitivity : 93dB at 8 ohms Power requirement : as little as 2 watts Driver : Full range 4.5” paper dual cone Fostex with rubber impregnated surround, alloy chassis and fully shielded 2" Precision single port R cabling standard Cross-over : None Terminals : Heavy duty multiway gold plated binding posts. Cabinet : Composite (Ultralight MDF, Baltic Birch, and Phenolic) Wood finishes : Macassar Ebony, Teak Laminates : Black and Red Parisian Maple gloss Pearl, Blue Artic Pearl Gloss Warranty 10 year parts and labor for workmanship and defects Dimensions : 15” H x 12”W x 7.5”D Weight : 20 pounds each

Imagine the harmonic integrity. No crossover means seamless music. The Super 3 BPC uses Twin front and rear firing 4.5" Fostex paper cone full-range drivers that are modified by Omega Speaker Systems. These drivers incorporates a very light cone and very strong motor to produce high sensitivity, speed, transparency, and excellent detail with amazing low level resolution. The Super 3 BPC is also a perfect point-source and is phase correct. Imaging and soundstage are not effected. By incorporating twin drivers front and rear firing the Super 3 BPC is able to reproduce more complex music with more dynamics and low end response than the Super 3 while producing a huge, deep and wide sound-stage. The music signal is shared by the twin drivers which increases sensitivity and lowers distortion. The Super 3 BPC has dual sets of binding posts which are connected to the drivers individually which allows the Super 3 BPC to be run in either 4 or 16 ohm impedance. Jumpers and diagram are provided for easy switching between 4 on 16 ohm, Bipole and Dipole as well as Monopole (front driver only) or Bi-amp. The Super 3 BPC is a relatively compact bass reflex speaker so positioning in your listening room is easy. Due to the rear firing driver a minimum of 4 feet from the back wall is recommended. We chose to manufacture bass reflex systems as oppose to bass horns because the bass reflex system has tighter more accurate bass that goes just as low or lower than bass horns. Cabinets are more compact and easier to place as well as lower in cost to manufacture. Bass reflex cabinets have no horn passage directly behind the driver so damping material can be placed to suppress standing waves and bounce back reflections that cause frequency cancellation and distortion. The Super 3 BPC incorporates damping techniques including: Omega double layer diffuser, acoustic foam, ladder bracing, and a triple layer semi floating baffle and back. Cabinets are constructed of 3/4" softwood M. D. F. are adhered with polyurethane glues and are veneered on all sides including double veneers on front and back.

Type : Ported Front and Rear Firing Dual Single Drivers / Switch-able, Bipole, Dipole and Monopole stand/shelf mount Frequency response : 56-20KHz Sensitivity : 96dB at 4 ohm Switch-able 4/16 ohm impedance, 8 ohm Monopole Front Firing Only, Bi-amp 8 ohm Power requirement : as little as 1.5 watts Driver :Twin Full range 4” paper cone Fostex with rubber impregnated surround, alloy chassis and fully shielded Cross-over : None Terminals : Standard multi-way gold plated binding posts. Twin Sets and jumpers Cabinet : heavily braced Composite Cabinet (Utralight MDF, Baltic Birch, Phenolic), Twin chambers 2" Flared ports Wood finishes : Macassar Ebony, Teak Laminates : Black and Red Parisian Maple gloss Pearl, Blue Artic Pearl Gloss Warranty 10 year parts and labor for workmanship and defects Dimensions : 20” H x 11”W x 14”D Weight : 45 pounds each

Imagine the harmonic integrity. No crossover means seamless music. The TS33 uses Twin 4.5" Fostex paper cone full-range drivers that are modified by Omega Speaker Systems. These drivers incorporates a very light cone and very strong motor to produce high sensitivity, speed, transparency, and excellent detail with amazing low level resolution. The TS33 is also a dual point-source and is phase correct. Imaging and soundstage are not effected. By incorporating twin drivers the TS33 is able to reproduce more complex music with more dynamics and low end response than the TS3. The music signal is shared by the twin drivers which increases sensitivity and lowers distortion. The TS33 has dual sets of binding posts which are connected to the drivers individually which allows the TS33 to be run in either 4 or 16 ohm impedance. Jumpers and diagram are provided for easy switching between 4 on 16 ohm. The TS33 is a compact bass reflex speaker so positioning in your listening room is easy. We chose to manufacture bass reflex systems as oppose to bass horns because the bass reflex system has tighter more accurate bass that goes just as low or lower than bass horns. Cabinets are more compact and easier to place as well as lower in cost to manufacture. Bass reflex cabinets have no horn passage directly behind the driver so damping material can be placed to suppress standing waves and bounce back reflections that cause frequency cancellation and distortion. The TS33 incorporates damping techniques including: Omega double layer diffuser, acoustic foam, ladder bracing, and a triple layer semi floating baffle and back. Cabinets are constructed of 3/4" softwood M. D. F. are adhered with polyurethane glues and are veneered on all sides including double veneers on front and back.

Type : Ported Front Firing Dual Single Drivers stand/shelf mount Frequency response : 56-20KHz Sensitivity : 96dB at 4 ohm Switchable 4/16 ohm impedance Power requirement : as little as 1.5 watts Driver :Twin Full range 4” paper cone Fostex with rubber impregnated surround, alloy chassis and fully shielded Cross-over : None Terminals : Standard multiway gold plated binding posts. Twin Sets and jumpers Cabinet : heavily braced softwood MDF and adhered with polyurethane glues. Wood finishes : Cherry, Maple, Sapele, and Walnut with solid hardwood corners Laminates : Black and Red Parisian Maple gloss Pearl, Blue Artic Pearl Gloss Warranty 10 year parts and labor for workmanship and defects Dimensions : 18” H x 8.5”W x 13”D Weight : 30 pounds each

Imagine the harmonic integrity. No crossover means seamless music. The Minuet uses Twin 4" extremely light poly cone full-range drivers with structural ribs and phase plugs. These drivers incorporates a very light cone and very strong motor to produce high sensitivity, speed, transparency, and excellent detail with amazing low level resolution. The Minuet is also a dual point-source and is phase correct. Imaging and soundstage are not effected. By incorporating twin drivers the Minuet is able to reproduce more complex music with more dynamics and low end response. With a combined X-max of 8mm the Minuet has amazing low end response. The balance is extremely smooth and on the polite side. Perfect for higher powered Push-Pull and Solid State amps. The music signal is shared by the twin drivers which increases sensitivity and lowers distortion. The Minuet has one set of binding posts which are connected to the drivers in series which allows the Minuet to be run in an 8ohm impedance. The Minuet is a compact bass reflex speaker so positioning in your listening room is easy. We chose to manufacture bass reflex systems as oppose to bass horns because the bass reflex system has tighter more accurate bass that goes just as low or lower than bass horns. Cabinets are more compact and easier to place as well as lower in cost to manufacture. Bass reflex cabinets have no horn passage directly behind the driver so damping material can be placed to suppress standing waves and bounce back reflections that cause frequency cancellation and distortion. The Minuet incorporates damping techniques including: Omega double layer diffuser, acoustic foam, ladder bracing, and a triple layer semi floating baffle and back. Cabinets are constructed of 3/4" softwood M. D. F. are adhered with polyurethane glues and are veneered on all sides including double veneers on front and back.

Type : Ported Front Firing Dual Single Drivers stand/shelf mount rear 2" Port Frequency response : 52-20KHz Sensitivity : 90dB at 8 ohm 8 ohm impedance Power requirement : as little as 10 watts Driver : Twin Full range 4” poly cone wide band with phase plugs and rubber surround, alloy chassis and fully shielded Cross-over : None Terminals : Standard multiway gold plated binding posts. Cabinet : heavily braced softwood MDF and adhered with polyurethane glues. Wood finishes : Cherry, Maple, Sapele, and Walnut with solid hardwood corners Laminates : Black and Red Parisian Maple gloss Pearl, Blue Artic Pearl Gloss Warranty 10 year parts and labor for workmanship and defects Dimensions : 15” H x 7.5”W x 12”D Weight : 22 pounds each

3-layer composite baffle and back: 3/4" Ultralight MDF, 6mm Finland Birch ply, and leather. 3/4" Ultralight MDF for top, bottom, and sides. Dimensions: 12" tall x 9" wide x 7" deep. Finish: Macassar Ebony w/ lbrown leather front and back, or high gloss Rosewood w/ black leather front and back. Magnetized grills (black).

Speaker Specifications: Sensitivity: 90dB. Impedance: 4-ohms. Driver: Full range 4” poly cone wide band with phase plugs and rubber surround, alloy chassis and fully shielded